Let's Program the Transistors
L&T Emsys Interview Question Bank continued from Part 1… Q : Which is the basic gate used for TTL logic? A : The basic gate used for TTL logic is NAND gate. Q : What is pipelining? A : Pipelining is the process of en-queuing the next process to be executed while the current process is…
Let us now look at the questions asked in the recent times of interviews of L&T Emsys, a division of L&T Technology Services that deals with embedded systems and software development (and thus, the name L&T Emsys). It is an ECE core company which was incorporated in February 2001 and has three development centres in Mysore,…
Cisco Systems Interview Question Bank continued from Part 3… Q : What is the function of ALE in 8085? A : ALE stands for Address Latch Enable. In 8085 microprocessor, there are 16 address lines for 16 bit memory location. Of these 16 bits, higher order 8 bits are dedicated only for carrying the memory…
Read More “Cisco Systems Interview Question Bank – Part 4” »
Cisco Systems Interview Question Bank continued from Part 2… Q : What is the sliding window concept in protocols? A : The sliding window is an abstract concept that defines the range of sequence numbers that are the concern of the sender and receiver. According to this concept, sender has its own concerned set of…
Read More “Cisco Systems Interview Question Bank – Part 3” »
Cisco Systems Interview Question Bank continued from Part 1… Q : What is PAT? Give one real-life application of it. A : PAT (Port Address Translation) is an extension to NAT that allows multiple devices connected on a LAN to be mapped onto a single public IP address. PAT aims to conserve IP addresses. For example,…
Read More “Cisco Systems Interview Question Bank – Part 2” »
Qualcomm Interview Question Bank continued from Part 3… Q : What is race-around condition? What is the solution for it? A : In JK flip-flop, when both J and K are 1, the state (output) of the flip-flop will oscillate between 0 and 1 resulting to uncertainty in the state of the flip-flop at the…
Qualcomm Interview Question Bank continued from Part 1… Q : Draw the circuit diagram for a random number generator. A : Following are the circuits for a random number generator (RNG), (i) using IC 555 timer, IC 4026 and 7-segment, (ii) using 8051 and 7-segment, Q : What are the advantages and disadvantage of IIR and…
Hey Everyone. This is my telephonic interview experience at STMicroelectronics for the position of an intern. I received a called from STM in the morning. I greeted the interviewer with a good morning and the interview started with asking about me. Then he asked me about what I had done in my four years of…
Read More “Telephonic Interview Experience – STMicroelectronics” »
This is my interview experience with Ericsson India. Ericsson came to our college (JIIT Noida) on 29th March 2016. It was two days process. On the first day they conducted the Presentation and Aptitude Test. Second day GD, Technical Interview along with HR interview was scheduled. The selection procedure consisted of following parts: Round-1: Aptitude…
Read More “Interview Experience – Ericsson India (On Campus)” »
Wipro Limited Technical Interviews Question Bank continued from Part-1 Q. What is the difference between authorization and authentication, for example when you enter your card details while net banking?Ans. A user is first authenticated, i.e. identity of the user is verified (valid bank card details). Then it proceeds to authorization where if the user has…
Read More “Wipro Limited – Technical Interview Question Bank – Part 2” »